Cherry Mobile Cubix Cube 3 Stock ROM

I would like to share the firmware for Cherry Mobile Cubix Cube 3 that can be flash through SP Flash Tool. Firmware damage such as boot loop and dead boot is common in most Android device especially if you are a type of person who loves to tweak your device. If you ever encountered such issue in your Cherry Mobile Cubix Cube 3, the only way to restore is to flash the stock ROM.

The stock ROM included in this guide is for Cherry Mobile Cubix Cube 3 with Lollipop 5.1 Android version. Check your phone model carefully.

 Things you need

➡️️ Desktop or laptop with Windows operating system (preferably Windows 7)

➡️️ Winrar

➡️️ USB Cable

➡️️ MT65xx Preloader Driver

➡️️ SP Flash Tool (Latest version

If Password required : thefirmwarehub

If you don’t have an experience in flashing, I highly suggest that you read the detailed instruction.

Flash Cherry Mobile Cubix Cube 3 Firmware

✅Create a folder on your desktop and extract all the files.

✅Install MT65xx Preloader driver.

✅Open SP Flash tool folder and run flash_tool.exe.

✅Browse the scatter file from the firmware folder.

✅Load the preloader and cache file from the firmware folder. The preloader is bd6753_65c_a_l1.bin.

✅Since the battery is non removable. You have to make sure that your device is totally turn off.

✅Now click the Download button from the SP Flash Tool

✅While holding either volume up or down, plug your device into the computer.

✅The process should start now.

✅Wait for the process to finish.

✅Boot your device.

It takes 15 – 20 minutes to boot successfully, please have a patience. If it doesn’t boot, please boot into recovery mode and do a factory data reset.

Need help? Read the detailed instruction for flashingfirmware using SP Flash Tool including driver installation.