A thread starter somewhere in the forum is asking for the
firmware of Starmobile Roar and luckily someone just shared the firmware
unfortunately it contains a password and you won’t be able to extract it.
I decided to upload and share the Starmobile Roar firmware
to help those in need. You can use this stock to unbrick any bootloop or hard
bricked Starmobile Roar. You will just need to install the corresponding driver
and use the appropriate tool like SP Flash Tool to flash the firmware.
Before we proceed to reviving your device, here is the quick
specs you might be interested to know about.
Are you ready? Please download the required files below. If
you have an Adblock extension enabled in your browser, you need to disable it
to view the link correctly. Don’t forget to refresh this page.
Things you need
➡️️ Desktop or laptop with Windows operating system
(preferably Windows 7)
➡️️ Winrar
➡️️ USB Cable
If Password required
: thefirmwarehub
If you don’t have an
experience in flashing, I highly suggest that you read the detailed
instruction.
Flash Starmobile Roar Firmware
✅Create a folder on
your desktop and extract all the files using Winrar.
✅Install MT65xx
Preloader driver.
✅Open SP Flash tool
folder and run flash_tool.exe.
✅Browse the scatter
file in the Starmobile Roar firmware folder.
✅Turn off your device.
Wait for at least 5 seconds to make sure your device is completely turn off.
✅Now click the
Download button from the SP Flash Tool.
✅Plug your device into
the computer.
✅The process should
start now, you will see a progress bar from SP Flash tool.
✅Wait for the process
to finish.
✅You’re done.
Need help? Read the
detailed instruction for flashingfirmware using SP Flash Tool including
driver installation.
No comments:
Post a Comment