Today I have managed to fix 3 units of Starmobile Up+, one hardware related issue while the other
two is a firmware related problem due to system modification and malfunction. I
always write a guide every time I am dealing with Android smartphone problem
that has a software issue such as boot loop and dead boot so in any case my
readers encountered the same problem, they can do it by themselves.
This device comes with MediaTek chipset therefor we are
going to use SP Flash tool to flash the firmware of Starmobile Up+. If you have
SD card plugged in your Starmobile Up+, kindle remove it to avoid any data loss
just to be safe.
The firmware included in this guide is for Starmobile Up+
and it is only compatible with Up+ not Up. Check your device model carefully,
flashing the wrong firmware might result to corrupted partition.
Are you ready? Please download the required files below. If
you have an Adblock extension enabled in your browser, you need to disable it
to view the link correctly. Don’t forget to refresh this page.
Things you need
➡️ Desktop or laptop with Windows operating system (preferably
Windows 7)
➡️ Winrar
➡️ USB Cable
➡️ SP Flash Tool (Latest version
If Password required : thefirmwarehub
If you don’t have an experience in flashing, I highly
suggest that you read the detailed instruction.
Flash Starmobile Up+ Firmware
✅Create a folder on your desktop and extract all the files
using Winrar.
✅Install MT65xx Preloader driver.
✅Open SP Flash tool folder and run flash_tool.exe.
✅Browse the scatter file in the Starmobile Up Plus firmware
folder.
✅Turn off your device. Wait for at least 5 seconds to make
sure your device is completely turn off.
✅Now click the Download button from the SP Flash Tool.
✅Plug your device into the computer.
✅The process should start now, you will see a progress bar
from SP Flash tool.
✅Wait for the process to finish.
✅You’re done.
Need help? Read the detailed instruction for flashingfirmware using SP Flash Tool including driver installation.
No comments:
Post a Comment